1. Leal-Junior Arnaldo G., Díaz Camilo R., Marques Carlos, Pontes Maria José, Frizera Anselmo. 2019.3D-printed POF insole: Development and applications of a low-cost, highly customizable device for plantar pressure and ground reaction forces monitoring, Optics & Laser Technology, 116, DOI:10.1016/j.optlastec.2019.03.035
2. Valencia-Jimenez Nicolas, Leal-Junior Arnaldo, Avellar Leticia, Vargas-Valencia Laura, Caicedo-Rodríguez Pablo, Ramírez-Duque Andrés, Lyra Mariana, Marques Carlos, Bastos Teodiano, Frizera Anselmo. 2019.A Comparative Study of Markerless Systems Based on Color-Depth Cameras, Polymer Optical Fiber Curvature Sensors, and Inertial Measurement Units: Towards Increasing the Accuracy in Joint Angle Estimation, Electronics, 8, DOI:10.3390/electronics8020173
3. Fernandes C., Vukčević V., Uroić T., Simoes R., Carneiro O.S., Jasak H., Nóbrega J.M.. 2019.A coupled finite volume flow solver for the solution of incompressible viscoelastic flows, Journal of Non-Newtonian Fluid Mechanics, 265, DOI:10.1016/j.jnnfm.2019.01.006
4. Ferrás L. L., Ford N. J., Morgado M. L., Rebelo M.. 2019.A Hybrid Numerical Scheme for Fractional-Order Systems, DOI:10.1007/978-3-319-91334-6_100
5. Bose S., Cunha J.M.V., Borme J., Chen W.C., Nilsson N.S., Teixeira J.P., Gaspar J., Leitão J.P., Edoff M., Fernandes P.A., Salomé P.M.P.. 2019.A morphological and electronic study of ultrathin rear passivated Cu(In,Ga)Se2 solar cells, Thin Solid Films, 671, DOI:10.1016/j.tsf.2018.12.028
6. Rodrigues Joana, Fernandes António J. S., Monteiro Teresa, Costa Florinda M.. 2019.A review on the laser-assisted flow deposition method: growth of ZnO micro and nanostructures, CrystEngComm, 21, DOI:10.1039/c8ce01773e
7. Costa Ana Elisa, Ferreira da Silva Alexandre, Sousa Carneiro Olga. 2019.A study on extruded filament bonding in fused filament fabrication, Rapid Prototyping Journal, 25, DOI:10.1108/RPJ-03-2018-0062
8. Lopes P. E., Moura D., Freitas D., Proença M.F., Figueiredo H., Alves R., Paiva M. C.. 2019.Advanced electrically conductive adhesives for high complexity PCB assembly, AIP Conference Proceedings, DOI:10.1063/1.5084887
9. Santos A., Amorim L., Nunes J.P., Rocha L.A., Silva A.F., Viana J.C.. 2019.Aligned carbon nanotube based sensors for strain sensing applications, Sensors and Actuators A: Physical, 289, DOI:10.1016/j.sna.2019.02.026
10. Chapa Manuel, Alexandre Miguel F., Mendes Manuel J., Águas Hugo, Fortunato Elvira, Martins Rodrigo. 2019.All-Thin-Film Perovskite/C–Si Four-Terminal Tandems: Interlayer and Intermediate Contacts Optimization, ACS Applied Energy Materials, 2, DOI:10.1021/acsaem.9b00354